Select Page

Trex Signature Glass Panels – 36″ Rail Height

$0.00

A CUSTOMIZED COMPLEMENT TO MODERN DECKING.

¼” Clear tempered Glass

Flat polished edges

Individually boxed panels ready for install

Each panel stamped with tempering spec codes

Lifetime warranty

New Product total
New Grand total
Grand total
Please Increase QTY to Add Another Panel
QTY
Category:

Description

¼” Tempered Glass

36” Rail = 32-5/16” Panel Height

42” Rail = 38-5/16” Panel Height

Custom length panels not to exceed 67” (for 6’ long railing sections)

A Lifetime Limited Warranty is provided by the manufacturer. Maintaining the appearance of your Trex Transcend railing is important. Occasional washing is recommended. Over time your railing may show signs of weathering as a result of exposure to the elements. The frequency of cleaning will depend on the environment and exposure to various types of elements.

» Clean railing with standard cleaning vinegar or mild soap and water.
» For more detailed cleaning recommendations, please refer to the Trex Railing Care and Cleaning guide found on www.trex.com.

NOTES:

» TREX TRANSCEND RAILINGS ARE DESIGNED TO BE INSTALLED OVER THE DECKING FRAME OR ON INSIDE OF RIM JOIST. NOTCHING OF PRESSURE-TREATED POSTS OR POSTS INSTALLED ON OUTSIDE OF RIM JOIST IS NOT ALLOWED.

» All Trex Transcend railing lengths are manufactured at ON CENTER dimensions (spanning from center of each post): 67-5/8 inches (1718 mm) for 6 feet (1.83 m) on center, and 91-5/8 inches (2353 mm) for 8 feet (2.44 m) on center. Note that railings are designed to be slightly longer than required to allow for very slight play in post placement – some minimal trimming may be required. IT IS VERY IMPORTANT TO MEASURE FIRST.

» USE STANDARD DRILL WHEN INSTALLING BRACKETS TO POSTS AND BRACKETS TO RAILS. DO NOT USE IMPACT DRIVER.

IMPORTANT NOTES ON COCKTAIL RAILING :

» ONLY use with 4" x 4" (102 mm x 102 mm) post and post sleeve. Cutting post and post sleeve ONLY applies to the Cocktail style railing.

» Enhance cannot be used as top board for cocktail rail.

NOTES ON STANDARD GLASS PANNEL RAILING:

» You must purchase the 1/4 inch (6 mm) tempered glass panels.

» Glass panels ONLY for use with maximum 6 feet (1.83 m) on center post spacing.

» You must purchase the 1/4 inch (6 mm) tempered glass panels. See dimensions at below.

» Glass panels ONLY for use with maximum 6 feet (1.83 m) on center post spacing.

» Trex post mounts cannot be used for this application.

» DO NOT use Enhance deck board for top rail over universal rails.

Additional information

Width

36" – 38", 38" – 40", 40" – 42", 42" – 44", 44" – 46", 46" – 48", 48" – 50", 50" – 52", 52" – 54", 54" – 56", 56" – 58", 58" – 60", 60" – 62", 62" – 64"

Install Instructions

Reviews

There are no reviews yet.

Be the first to review “Trex Signature Glass Panels – 36″ Rail Height”

Your email address will not be published. Required fields are marked *